Art. | Dosage | Code | |
P220 | 1,5% | 88P2200199 | Lt. 1 |
P220 | Corrosion inhibitor liquid
Corrosion inhibitor liquid with bactericide to be used to fill in the system. It prevents carbonates to adhere and protects common metals from oxidation and corrosion. It contains a strong biocide able to considerably reduce the algae and biological products development in heating systems. Art. P220 forms a monomolecular protective film on the walls of the heating and cooling systems and removes the thermal and gaseous strains due to the coupling of different metals. Suitable for a good maintenance of the hydraulic circuit system. Dosage: 1,5% of the total water in the system.
Codes and dimensions
Related products
P204 | Pipe fixing tool with clips
Pipe fixing tool with clips art. P203. It permits an upright position whilst working minimizing fatigue.
P100 | Insulating adhesive perimeter strip
Insulating adhesive perimeter strip made of closed-cell polyethylene foam, suitable for the installation of radiant panels. It absorbs the thermal dilatations of the panel and the film prevents the cements mixture from seeping in the lower part of the panel. Available in 50 mt rolls only.
Technical data sheet
P203 | Clips to automatically fix the pipe on panels
Clips to automatically fix the pipe. Made of plastic and adhesive-joined. Insertion with clip fixing tool. Ideal for flat panels.
P207 | Polypropylene fibers
Polypropylene fibers flakes to protect against plastic shrinkage cracks. The fibers must be added to the dry components before the mixture or to the ready dough in the cement mixer before casting; the minimum dosage recommended is a bag of 0.5 kg per m3 of concrete.
Technical data sheet
P219 | Glass fiber mesh
Glass fiber mesh. Size: 40x40 mm. Rolls: 50 mq, h=1 mt. It allows a better uniformity during the ripening step of the screed.
P211 | Polyethylene film – 0,10 mm Thickness
Polyethylene film. 0,10 mm Thickness. Available in 280 smq rolls. It is used below insulating panels to prevent moisture infiltration or in dry installations systems to avoid the friction between two different metals or components.
P215 | Polyamide 90° pipe bend
Polyamide 90° pipe bend for Ø 16-17-18-20 mm pipes; it can be placed during or after pipe installations and it is ideal for piping near manifolds.